![background image](http://html1.mh-extra.com/html/baby-lock/ble1ex/ble1ex_instruction-and-reference-manual_3257907045.webp)
Cleaning
Replacing LED Lighting
Your baby lock will operate at best performance if it is kept clean at all times. The serger's cutting
action creates much more lint than you will find on conventional sewing machine.
Your serger's major moving parts are well protected and do not need to be oiled.
However, we recommend to use the cleaning brush often during garment construction in order to
keep lint off the blades, the needle bar, the feed dog mechanism and loopers. If machine needs
to be oiled, check with your nearest baby lock retailer for use of high grade recommended sewing
machine oil.
TO REMOVE NEEDLE PLATE PROCEED AS FOLLOW:
1. For safety reasons, unplug main power cord.
2. Raise and remove presser foot.
3. Select stitch length dial to rolled hem setting.
4. Remove needles from needle clamp.
5. Turn your handwheel until the upper looper is in the far right position.
6. Remove the needle plate. Remove front screw with screwdriver and back screw with allen
wrench. (fig. A)
7. With your right hand, first raise the needle plate in front of the blade. Pull slightly to the right,
then remove to the left.
8. Replace in reverse procedure.
9. Finally, position the needle plate so that the needles lower in the center of each hole on the
needle plate. (fig. B)
Your baby lock enspire is equipped with long-life LED lighting system, which is not necessary to
change bulbs.
In case of replacing LED unit, please contact your authorized baby lock dealer.
43
M
A
I
N
T
E
N
A
N
C
E
A
B
Needle
Summary of Contents for BLE1EX
Page 1: ...Model BLE1EX...