6
3
Secure your car seat onto the stroller using the safety belt on the
Car Seat Adaptor Brackets.
Maxi Cosi
Safety 1st & Eddie Bauer
Uses the 2 Adaptor Brackets ONLY
Uses the 2 Adaptor Brackets, the
U-shaped Support Bar (facing up) and
the Spring Support Bar
1
Insert Adaptor Brackets into the corresponding mounting brackets
on your stroller. The Adaptor Brackets are secure when they click
into place.
NOTE: The right and left mounting brackets on your stroller
are determined by standing in front of and facing the stroller.
2
Place your car seat onto the Adaptor Brackets until it clicks into place.
The car seat should be supported by the Adaptor Brackets.
4
Connect the Spring Support Bar
by compressing and guiding it
into the open holes on the
U-shaped Support Bar.
7
Secure your car seat onto the
stroller using the safety belt on
the Car Seat Adaptor Brackets.
1
Insert Adaptor Brackets into the
corresponding mounting brackets
on your stroller. The Adaptor
Brackets are secure when they
click into place.
NOTE: The right and left
mounting brackets on your
stroller are determined by
standing in front of and
facing the stroller.
5
Place your car seat onto the
U-shaped Support Bar, making
sure that the Spring Support
Bar engages the locking
mechanism where applicable.
Adjust the U-shaped Support Bar
to the proper length by sliding the
U-shaped Support Bar in or out,
using the car seat to ensure
proper distance. The car seat
should be supported by the
Adaptor Brackets.
2
Open the compression locks on
the Car Seat Adaptor by flipping
the red latches up.
3
Insert the U-shaped Support Bar
with the curved end pointing up.
6
Once the car seat is properly
positioned, close the compression
locks by flipping the red latches
down to hold Support Bars
in place.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
7
