2
Baby Trend, Britax Chaperone, Cosco, Evenflo, Graco
3
4
5
6
7
Uses the 2 Adaptor Brackets and the
U-shaped Support Bar (facing up)
Baby Trend Expedition
Baby Trend Flex Loc
Baby Trend Gabriella
Baby Trend Stride Sport
Baby Trend StrideZ
Britax Chaperone
Cosco Sprint
Evenflo Aura Elite
Evenflo Embrace 5
Evenflo Embrace LX
Evenflo Journey Premier
Evenflo Nestino Odyssey
Graco Infant SafeSeat Step 1
Graco SnugRide
Graco SnugRide 2
Graco SnugRide 32
Graco SnugRide 35
Peg Perego Primo Viaggio SIP
Peg Perego Primo Viaggio SIP 30/30
Britax Companion
Safety 1st Designer 22
Eddie Bauer Adventurer
Maxi Cosi Cabrio
Maxi Cosi Mico
4
Place your car seat onto the
U-shaped Support Bar. Adjust
the U-shaped Support Bar to
the proper length by sliding the
U-shaped Support Bar in or out,
using the car seat to ensure
proper distance. The car seat
should be supported by the
Adaptor Brackets.
1
Insert Adaptor Brackets into the
corresponding mounting brackets
on your stroller. The Adaptor Brackets
are secure when they click into place.
NOTE: The right and left mounting
brackets on your stroller are
determined by standing in front
of and facing the stroller.
2
Open the compression locks on
the Car Seat Adaptor by flipping
the red latches up.
5
Once the car seat is properly
positioned, close the compression
locks by flipping the red latches
down to hold Support Bars
in place.
3
Insert the U-shaped Support Bar
with the curved end pointing up.
6
Secure your car seat onto the
stroller using the safety belt on
the Car Seat Adaptor Brackets.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
Table of Contents
3
