50
ACCESSORIES
Head and Body Support with the Lower-Seat Pad
• Use only in the rear-facing mode.
•
The head and body support must be used if shoulders are
below the lowest harness setting.
• Never allow head and body support to bunch or fold behind
child.
• Do not use the head support without the lumbar support.
To install, thread the head support straps through the headrest
and use the fastening strips to connect the straps together.
Then thread the buckle through the slot on the seat pad
portion of the body support.
To remove, undo the fastening strips and pull the straps out of
the headrest.
Unbuckle the harness and buckle, then pull out the body
support.
Note: The upper-head and body support portion may be
separated from the lower-seat pad portion by undoing the
three snaps.
ACCESSORIES
(on select models)
All infant support pieces (Head and Body Support, Lower-Seat Pad, and Lumbar Support)
can be used Rear-Facing up to 15 lbs (7 kg). This may vary slightly depending on child’s
stature. Use the infant support pieces to ensure the child is secure, comfortable, and their
head does not tilt forward. Use the following guidelines: