4
5
4
5
1
Align wheel axle with wheel mount on stroller frame.
2
Insert the wheel axle into the wheel mount until it clicks into place.
Gently tug on wheel to make sure the rear wheel is locked in place.
REAR WHEELS
To install rear wheels:
1
Press the wheel release button while gently sliding the wheel
away from the wheel mount.
To remove the rear wheels:
Wheel
release
button
1
Unclip top of shoulder strap
from the seat and re-clip on
the pair of seat loops closest
to child’s shoulder height.
1
Pull shoulder pads down close to main harness buckle.
2
Hold the plastic guide and pull the strap end to tighten
or pull the upper harness strap to loosen.
3
Fasten both shoulder strap buckles
into the crotch strap buckle. The
buckles should always be clicked
into place before use.
NOTE:
If you have special harness requirements and wish to attach
your own harness, then there are D rings provided on the
waist harness for the attachment of your alternative harness
system. The alternative harness system must conform to
BS EN 13210:2004.
SAFETY HARNESS
To adjust harness height:
To adjust harness length:
WARNING:
Always use the
crotch strap in
combination with
the shoulder straps
and waist belt.
To buckle:
To unbuckle:
4
Press both sides of the
shoulder buckles to
release them from the
crotch buckle.
WARNING:
Avoid serious
injury from falling
or sliding out.
Always properly
adjust and fasten
safety harness.
PR_102511d_MA_City Mini_4Whl_Instruct_UK.indd 4-5
11/18/11 12:14 PM
