![background image](http://html.mh-extra.com/html/baby-express/be-mine/be-mine_user-manual_462108007.webp)
If using double sides expression mode, insert two silicone tubes into
the air vent holes at the bottom of the pump motor unit.
Put the silicone diaphragm into the T-joint flange and press the rim
to ensure a perfect seal. Then put the flange cap on the diaphragm,
press it down tightly to fit it on.
Insert the massage cushion into the T-joint flange and press the rim
to ensure a perfect seal.
Product assembling sequence
Insert the valve on the cylinder under the T-joint flange, push it in until
it fits tightly.
Attach the bottle into the bottom of the T-joint flange until it’s tightly
joined.
If using single expression mode, insert one silicone tube into the left
air vent hole at the bottom of the pump motor unit.
Put on the pump cover. (Please remove the pump cover when using
it, and put in on when storing).
Note: Check all the components are correctly assembled to ensure a perfect seal state before
each use.