17
10. Do not insert spoons, chopsticks, etc. at the milking mouth. Do not move the
machine or disassemble or assemble parts during operation.Personal injury or
machine malfunction.
9. For safety reasons, be sure to use it after connecting it to a grounded outlet.
Otherwise, it may become an electric shock, fire, malfunction or explosion.
The cause of the accident.
11. Keep the product away from where children can touch.
12. Do not clean the machine's unremovable parts
13. Please comfirm the temperature before you give it to your baby.
2.Do not subject the unit to sharp temperature changes or high humidity.
3.Remove and dry the water tank if you do not plan to use the machine for a long
time (over 30 days)
1.The Preparing Machine for Baby Formula should be transported at an ambient
temperature of +41°F to +86°F and maximum relevant humidity of no more than
75%.
6. Do not plug or unplug the power supply directly with wet hands, which may cause
electric shock or personal injury.
7. Do not allow the body to get in or spray on the water to prevent foreign matter
and water from entering the ON/OFF button.
8. Do not touch the switch when the hand is wet, which may cause electric shock,
fire, etc.
18
When the display shows E05,it means the water tank is short of water.
Q1:The display shows «E05»
Q2.Excessive amount of milk powder
1.The lid of powder box have not closed
2.The powder box have not installed correctly
Q3.Short amount of milk powder
1.The powder box have not installed correctly
2.The powder box is short of formula powder
3.The rotor in the box stuck.
Q4.There is no formula came out when press the Start button
1.If the milking light is flashing,that means the water does not reach
the set temperature,please wait a few minutes.
2.The Warning lights turn on, please check the corresponding
warning light and operate.
3.The machine is equipped with a bottle sensor to prevent the milk
from being accidentally touched after the milk is flushed. If the
secondary brewing is required, the bottle must be removed before
re-positioning and the machine can be started.
Q5.The water output is not accurate enough
As there is a 5% error in the milk powder scale of the bottle, if you
think that the water output is too much or too little, please take the
electronic weighing result as the standard.
