3
FORMULA PRO® PARTS
TECHNICAL DATA
Model: FRP0045
Supply Voltage: 220V-240V 50/60Hz
Current: 2.5A
Heater Power: 500W
Motor Power: 20W
Hand-wash all parts (except base) and dry thoroughly.
Then assemble as shown on pages 5 & 6.
Powder Container Lid
Stirring Wheel
Locking Cover with
Silicone Scraper
Upper Measuring Wheel
Lower Measuring Wheel
Powder Container
Axle
Powder-Dispensing Hole
Control Panel
Base
Water Tank Lid
Bottle Grate
Funnel
Water Tank
Funnel Cover
Drip Tray
Never clean any of these parts in a
dishwasher, sterilizer or microwave!
Funnel Compartment
ABOUT WATER TEMPERATURE
For quickest warming time, always fill the water tank with room temperature water. Flashing green & yellow lights mean
the water poured into the water tank is too hot or too cold. The machine will not operate while the green & yellow lights flash.
The heater in the water tank will warm the water and keep it warm as long as the machine is powered on.
If you refill the water tank with room temperature water and need to use the machine right away, the machine can be used
while water is heating (flashing yellow light).
Place 300ml or larger container
to catch water.
Your Formula Pro® is now ready to use with powder.
Fill water tank to MAX line with
room temperature water only.
The Formula Pro® will stop after
dispensing 300ml of water. Dispose
of the water captured in the container.
FLUSHING THE FORMULA PRO® BEFORE FIRST USE
4
Never fill water tank with hot or cold water. If you boil water before using it in the machine, let the water cool to
room temperature before pouring it into the water tank.
2
3
Choose 300ml. size by
pressing ml button
4 times.
Press start to begin rinsing.
3
1
Don’t add
powder yet
Power Cord and Power Switch
(on back of base)