IMPORTANT SAFEGUARDS
1
2
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock do not immerse cord, plug or appliance in water or other liquid.
4. This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
5. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
6. Children shall not play with the appliance
7. The use of accessory attachments not recommended by the appliance manufacturer may cause
fire, electric shock or injury.
8. Use on level surface and be sure there is no debris under the unit and the rubber pads are
touching the surface.
9. Household use only. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot surfaces.
11. Do not place on or near hot gas or electric burner, or in a heated oven.
12. Extreme caution must be used when moving an appliance containing hot liquids.
13. Do not use appliance for other than intended use.
14. If any misuse, such as putting liquid that other than water to the water container. It will create potential
injury from misuse.
15. After heating or all the water is removed from the water tank, the heater surface is subject to residual
heat after use.
16. Except cleaning, any other servicing should be performed by an authorized service representative.
17. Make sure machine is turned off before unplugging.
18. A short power-supply cord is provided to reduce risks of becoming entangled in or tripping over a
longer cord. Extension cords are available and may be used if care is exercised in their use.
19. If using the machine with an extension cord, make sure the cord is the proper electrical rating for
the machine. The marked electrical rating of the cord set or extension cord should be at least as
great as the electrical rating of the appliance. The extension cord should be arranged so that it
does not drape over counter top or tabletop where it can be pulled on by children or tripped over
unintentionally.
20. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Contact Baby Brezza Customer Service using the contact
information on the back cover for assistance.
TECHNICAL DATA
Model: BRZ0057 Current: 0.69 A
Instant Warmer Parts
Get to know your Baby Brezza
Instant Warmer
1
2
Plug in power cord to turn on the Instant Warmer.
When plugged in, the Blue LED will turn on (Heater off - room temperature mode).
Fill Water Container with as much water as you plan to use for the day. We recommend
refreshing the water every 24-48 hours and rinsing the Water Container every time it’s
refilled.
3
Touch the
Water Container
Lid
Dispensing Lever
Dispensing Spout
Water Container
MAX line
MIN line
Base
Power Cord
(not shown)
Blue, Yellow, Red LED light
Temperature Button
Power Button
button to choose your desired temperature.
4
Touch the
button to turn on the instant warmer.
4
5
6
Place bottle under Dispensing Spout and press Dispensing Lever to dispense water.
Release lever to stop dispensing.
Add formula powder to bottle. Always follow formula manufacturer’s mixing ratio and
preparation instructions.
• Blue LED = heater off, room temperature
• Yellow LED = body temperature*
• Red LED = warmer than body temperature*
How to Use
Hand Wash Water Container & Lid before first use. See cleaning instructions on page 3.
• Never fill Water Container with formula
• Always use distilled or boiled water
cooled to room temperature
• Never pour boiling water into Water Container
• Always keep water filled above MIN Line
• Always keep the water tank covered with lid
to avoid contamination
The LED will flash while water is warming.
The LED will remain solid when water is warmed to selected temperature.
You can leave the Instant Warmer plugged in and set to your desired temperature so
warm water is always ready.
* Warming time may take 10-20 minutes depending on starting temperature of water
poured into water container.
ALWAYS
use boiled, cooled water or bottled water suitable for infant formula preparation.
! WARNING:
Heater Power: 160W
Supply Voltage: 220-240V ~ 50 - 60Hz
This marking indicates that products should not be disposed of with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
the return and collection systems or Contact the retailer where the product
was purchased. They can take this product for environmentally safe recycling.
