18
1. If your vehicle has not been fitted with the ISOFIX latch guides as standard, fit
the two latch guides
(K)
that came with the safety seat. (fig. 4.1)
TIP: The Isoclick Fix
®
anchorage points are located between the surface and the
backrest of the vehicle´s seat.
2. Find the Isoclick Fix
®
arms
(H)
located in the base of the seat. Extract them
by pulling the Isoclick Fix
®
unlock system button
(J)
(fig. 4.2).
3. Place the seat in the desired reclining position.
4. Place the safety seat on the vehicle seat.
5. Hold the safety seat with both hands and insert the two Isoclick Fix
®
arms
(H)
firmly into the insertion guides
(K)
until they fasten with a click on both sides.
The red button will partially change to green on both sides (fig. 4.3).
6. Push the safety seat towards the back using a firm, constant pressure on
both sides until it rests firmly against the vehicle seat. If necessary, adjust
the reclining of the vehicle´s seat backrest to ensure that the child seat rests
correctly. (fig. 4.4).
7. Place the child in the seat. Pull the vehicle safety belt and pass it in front of
the child until it reaches the vehicle seat belt buckle.
IMPORTANT! Make sure the belt is not twisted.
8. Insert the clasp into the vehicle seat buckle. You should hear a click (fig. 4.5 B).
9. Place the diagonal part of the belt and the part that crosses the lap on the
side of the vehicle safety seat buckle, through the abdominal belt guide
(D)
of the safety seat (fig. 4.5).
10. Pass the diagonal part of the belt through the diagonal belt guide
(B)
on the
headrest until it is fully extended and not twisted (fig. 4.5 A).
11. Make sure the diagonal part of the belt passes over the child’s collar bone and
not the neck.
IMPORTANT! The part of the abdominal belt should rest as low as possible over
the child’s hips, on both sides.
4. CAR SEAT INSTALLATION.
ISOCLICK FIX®+VEHICLE´S BELT
GROUP 2/3 only. From
4 years a 12 years (15-36 Kg)
NOTICE
