BABI SMART CUSHION User Manual Download Page 14

Important notes:

-

A Lithium battery is used in this device. Please ensure that when a new battery is
installed and the battery is placed the correct way. Please dispose of old battery
carefully and in special waste container.

-

Please ensure that the smart cushion is correctly installed and fitted into the
baby car seat before using the device.

-

Do not use the device with other non approved accessories.

-

Do not use the product without the cushion cover.

-

Do not emerge the inner part of the smart cushion in water, the inner part must
be removed before the cushion cover is washed.

-

Do not leave any packaging materials (plastic bags, cardboard boxes, etc.) that
can be hazardous to the child.

-

To prevent the risk of overheating, keep cushion away from sources of heat

-

Before using the device, make sure that is not damaged, otherwise contact the
dealer and do not use the device.

Babi Smart Cushion is designed to detect and alert the user of the presence of an
infant in their baby car seat. This product does not remove the user of their
responsibility for the care of any infant in a vehicle. Whilst the device indicates the
presence of the child in a vehicle it does not guarantee that the user will forget their
child, the device is intended to reduce the potential risk and alert the user, however
it does not guarantee anything in the case that the user takes no action on the alarm.

The use of this product with the Mobile phone App only means that the App is the
principle alarm method both by visual and audio. It is the responsibility of the user to
ensure that the:

Mobile phone is charged and in working order;

Bluetooth connection is paired and switched ON; and

Babisit App has been installed and is always switched ON.

13

Summary of Contents for SMART CUSHION



















Reviews: