SUBTERRA
Page 3
www.babcopark.ca
1.
INSTALLATION INSTRUCTIONS
1.1
Before you begin:
Installation, adjustments, and testing operations are to be performed by qualified staff only. Operations should be
performed by skilled and authorized personnel. Please follow all instructions shown below carefully, to prevent
possible damage to the car lift or risk of injury. Always be sure that the operating area is cleared of people.
Only skilled technicians appointed by the manufacturer or by authorized dealers, are allowed to install the car lift.
Serious injuries to people and damage to the equipment can be caused if this rule is not followed.
Transport: When the lift first arrives, check for possible damage due to transport operations. Also verify that all
items specified in the delivery notes are included. In case of missing parts, possible defects, or damage due to
transport, the person in charge or the carrier must be immediately informed.
The equipment can be lifted by crane using the 4 factory installed attachment points.
During lifting and placement in the pit, no person is allowed under or within falling distance of the lift.
During unloading operation lift must be handled as shown in the picture.
1.2
Preparation before installation:
The thickness and leveling of the base concrete are essential. The leveling adjustment ability of the lift itself
cannot be relied upon for a perfect level.
To install the lift, it is necessary to use a suitable foundation.
The manufacturer is not responsible for damage or incidents/accidents related to the pit construction.
1.3
Start Installation
1)
Assemble the hydraulic line and electrical connection line from the connection side of the lift where the lines
run to the control box.
Make sure the lines do not get trapped under the lift frame in next step.
2)
Lower the lift into the pit and level the lift as needed.
Use extreme caution not to crush hoses between the lift and the pit.
3)
Connect the oil hose
See the hydraulic diagram for oil hose connecting. Make sure that no soil or other foreign objects enter the
hoses.
4)
Hydraulic oil tank - pour 16 litres of L-HM32 anti-wear hydraulic oil (provided by user) into oil tank. Dexron III
ATF oil can be used.
