©2021 Babcock-Davis
Rev June 2021
Installation & Ope Maintenance
GRATEdesign, MATdesign, QuietFLEX
Models: BFD74LBM, BFD38LBM, BFQ38LBM, BFR34LBM
5
Great Products. Better Partners.
Babcock-Davis is a leader in roof hatches, smoke vents and safety railings for the commercial roofing market. We also manufacture
architectural access and safety-related building products for commercial structures. Babcock-Davis provides local connections through a broad
distribution network to accelerate and simplify the building process for contractors and building owners, offering hassle-free services including
access to technical experts, REVIT tools for BIM, HPDs for LEED v4, 3-part specifications and AIA-accredited continuing education courses.
•
Carpet should be deep cleaned with a hot water extraction cleaner once per month or
when vacuuming will no longer remove the soil. This may be monthly, quarterly, or
longer, depending upon soil and traffic conditions.
•
Inspect the grille or mat regularly for spots and stains, to reduce the possibility of them
becoming permanent.
•
Removing Spots
o
If the spot is semi-solid, scrape with a spoon or spatula and then blot with a damp
sponge. Work from the edge of the spot to the center. This will keep the stain from
spreading. If this procedure does not work, use a spot remover.
o
We recommend a dry system because it reduces solid build-up,
won’t leave floors
wet and slippery, and there is no risk in damaging the carpet from dye bleeding.
For most spills such as coffee, tea, pet stains, etc., a dry soil extractor works best.
o
Wet cleaning methods, including aerosols, foams, hot water extraction, or
shampoo will work, but sometimes they leave sticky detergent residue that will
accelerate soil build-up.
o
For oily stains such as tar, grease, paint, etc., a non-flammable dry cleaning
solvent works best. Be extremely careful when using dry cleaning solvent. Take
care to check for color fastness before cleaning the entire surface. Put a few drops
of stain remover in an inconspicuous area and press the area with a clean cloth for
ten seconds. If the color fades or changes, discontinue use.
Rubber
•
Use a mild detergent and water to damp mop the rubber treads. To remove caked on
mud, use a stiff brush.
•
Do not use petroleum-based products to clean rubber
. These types of solvents will damage
or fade the treads.
Rugged Scrub
®
•
The most effective way to clean the treads is with a garden hose or high-pressure washer,
as necessary. The treads can withstand pressure of up to 1,000 pounds per square inch. A
good heavy-duty vacuum cleaner with a rotating brush will remove most dirt from your
Rugged Scrub® treads during routine daily cleaning.
•
Do not use petroleum-based products to clean Rugged Scrub
®. These types of solvents will
damage or dissolve the treads.
