background image

Installation, Operation & Maintenance Manual

TABLE Of CONTENTS

2

Rev 09/17

Surface Mounted End Wall Guard

Model(s): BCGVS-EW-P

Table of Contents

General Description.........................................3
Installation.......................................................4-8
Parts.................................................................9
Maintenance....................................................10
Standard Warranty..........................................11
factory Assistance...........................................12

Copyright

2017 by Babcock-Davis. All rights reserved.

This document contains proprietary information. No part of this document 

may be reproduced without the prior written consent of Babcock-Davis.

Note

The information in this document is subject to change without notice.

General Safety Precautions

Improper selection, installation, or use can cause personal injury or property 

damage. It is solely the responsibility of the user, through its own analysis to 

select products suitable for their specific application requirements, ensure 

they are properly maintained, and limit their use to its intended purpose.

follow proper local, state and federal regulations for proper installation and 

operation requirements.

Summary of Contents for BCGVS-EW-P















Reviews: