1. Insert a bolt through the lowermost plate from the inside to the outside. Place this
bolt through the hole in the seat of the cargo bike and turn the screw, though not
too tightl just yet. The underside of the Toddler Seat should now be attached.
2. Put the Velcro strap through the lowest opening in the back of the Toddler Seat
and then stick it together. Insert a bolt through the hole in the Velcro on the back.
3. Insert the bolt through the plate with the straps. Hold the bolt in place with a finger
and insert it through the hole that you drilled in the container, then turn the screw.
Adjust the straps to the correct length and then tighten both screws.
Please note:
The Babboe Toddler Seat can still move. Only tighten the belts once your
child is in the Toddler Seat.
Securing the seat in the container
The results for the different variants cargo bikes are equal. The Babboe Toddler Seat is
now ready for use.
Enjoy your Cargo Bike ride!
Babboe BV |
|
www.babboe.co.uk
|
www.bakfietsen.com
www.babboecargobike.com
