BAB TECHNOLOGIE DUODMX GATEWAY Documentation Download Page 47

Page: 47 / 52

DUO DMX

Gateway

Firmware Update

DUO DMX

Gateway

b.a.b-technologie gmbh 47

FIRMWARE UPDATE

To update the firmware of the DUO

DMX

GATEWAY, please proceed as follows:



Use a blank SD card and copy the latest firmware file on it. The firmware file must be named

dmxknx.fir



Unplug the DUO

DMX

GATEWAY from the power supply and insert the SD card into the SD

card slot.



Press the "

button

" and hold it down while you connect the power supply again.



Wait until the LED of the DUO

DMX

GATEWAY has stopped to flicker and then release the

button.



Remove the SD card and start the machine again by separation of the supply voltage.



After a successful reboot is the device works with the latest firmware.

Summary of Contents for DUODMX GATEWAY





















































Search results

Summary of Contents for DUODMX GATEWAY

Reviews:

Related manuals for DUODMX GATEWAY

Brands by name

Popular brands

BAB TECHNOLOGIE DUODMX GATEWAY, Documentation

Search results

Summary of Contents for DUODMX GATEWAY

Reviews:

Related manuals for DUODMX GATEWAY

Brands by name

Popular brands