APP
MODULE Documentation
50 BAB TECHNOLOGIE GmbH
8
CONFIGURATION
8.1
SAVING THE CONFIGURATION
As soon as you have applied changes, such as on the name and the IP address of the
APP
MODULE and
want to save them, click on the button "
Save configuration
".
8.2
GENERAL
Click on “Configuration” to make changes to the general settings.
Figure 50: General configurations
Device name: Here, you can assign an individual device name for your
APP
MODULE. This name is then
displayed in the “Discovery Tool” and BAB STARTER.
Location:
Edit the installation site so that the correct time zone can be set.
System time:
The current system time of the device is shown. Clicking the button synchronises the
system time of the device with that of the local PC. To synchronise the system time
automatically, please use the NTP service. See “
Note: The system time must be correct for the software to run properly. Please make sure that the
system time is always correct. If synchronisation with NTP is not possible, correct the system time
manually.
