5
MANDATORY LOAD STRESS TEST
Step 1: Make sure all your connections are tight (see step 4)
Step 2: MANDATORY LOAD STRESS TEST YOUR LINE. Using either a 250 Lbs (113 Kg) weight or person, have
them test the NINJALINE™ by suspending the weight 5 ft. (1.5 m) from each end of the line.
RELEASING THE RATCHET
• To release the ratchet, pull up the vinyl coated gate inside the ratchet handle and open all the way until flat.
EXPECT A “POP”
• The second release gate should open, releasing the spool and the line tension should “pop” open with webbing
releasing (Figure 5).
• Continue to pull on the line until there is little tension left. Slide the remaining line out of the ratchet.
• Troubleshooting: If you ratchet too much of your line, you may experience difficulty releasing the line. Do your
best to lay the ratchet open and completely flat. If you cannot lay the ratchet flat, try pulling the gate and the spring
loaded piece on the opposite side of the gate at the same time, pulling in opposite directions (Figure 6). You may
need another person to help free the line while you hold the ratchet open. If this does not work, try leaving the
ratchet all the way open for several hours (overnight if possible), sometimes gravity and the weight of the ratchet
will allow the line to release naturally. If still experiencing difficulty removing your line from the ratchet, please call
customer service at 1-844-834-4334.
Figure 5
Figure 6
b4Adventure • Denver Colorado 80216 • 1-844-834-4334 • [email protected]
www.b4adventure.com - DC:081320
