12
If (B – D)
≤
X
≤
(B – C), it is qualified and the display has normal display
If X > (B – C), it is overweight and the display flickers.
Acquisition
of
target
value
Press
long until the display shows [
TAR ET
], and then press
to show current target value and flicker.
If F2.6 = 0, press
, the instrument will take the weight on current scale as the new target value and quit the setting interface.
If F2.6 = 1, the display shows [
000000
], to request manual change of target value. After change, press
to save setting data and
quit setting interface.
FUNCTION
OF
ACCUMULATION
SCALE
F2.1
=
4
Operation
method
In normal weighing state, when the scale is in , add weight to the scale and press
on operation panel, if the display shows [
Add--
]
progress bar, it indicates that the current display weight is included accumulated value, and then it returns to normal weighing state. If the
display shows [
--no--
] for a second, and returns to the normal weighing state, it indicates operation is invalid. Reason: 1. Between two
accumulation operations, the scale must have back-to- process, otherwise, accumulation is refused. 2. Accumulation operation is effective
only when display weight
≥
F2.2 is set. 3. The scale is in dynamic state.
Adjustment, clearing and printing of accumulated value
In normal weighing state, press
on operation panel for more than 2 seconds, the display will show [
Zero
] for a second, and then the
display shows current total accumulated value [
A 9. 00
] and flickers. To clear accumulated value, press [
Pr 20.
], to make flicker weight
be 0. Press
to print accumulated data. Press
to quit the interface.
Attention: set whether to be over detailed data or accumulated data in F4.6.
FUNCTION
OF
COUNTING
SCALE
F2.1
=
5
Instrument
display
[
c 128
], showing current quantity.
Sampling
method
1.
Check whether the scale is in , if not, press
for setting.
2.
Place materials counted on the scale.
3. Press
long until the display shows [
AMPLE
], and then press
. If F2.6 = 0, the display shows [
PC 00
]. Input the quantity
counted just now, and press
for confirmation. The instrument saves sampling data and quits the sampling interface. If F2.6 = 1, the
display shows [
000000
], input sample weight. Press
, the instrument saves setting data and quits sampling setting interface.
4. In this function, press
to display switch between quantity and weight.
FUNCTION
OF
ANIMAL
SCALE
F2.1
=
6
Operation
method
In normal weighing state, place the animal on the weighing platform and its weight must be
≥
threshold value set in F2.2. Press
,
instrument will collect data sampling. After sampling, the average value of sampling data will be locked, showing A X.XXX. Press
to
print; press
or
to quit the interface.
USER’S MANUAL
TRANSERENITE ARX
