11
, [lb/kg] and
in order, and the instrument displays
,
,
,
,
and
, press
to quit key
test.
F5.2
Display screen test
All strokes of meter display will have self-inspection, to observe whether there is lacks of strokes.
Press
or
to quit test of display screen.
F5.3
Display current internal code
The display will show internal code of current instrument after smoothing. Press
or
to quit the interface.
VI
FUNCTION
DESCRIPTION
X10
FUNCTION
F2.1
=
0
(ONLY
FOR
LCD
VERSION)
How
to
operate:
In normal weighing mode, press
on the operation panel once, the display accuracy will promote for 10 times and icon ×10 gets on
at the same time; press the key again it returns to normal weighing mode and the icon of ×10 gets off.
NOTE:
1. In net weight status, it’s forbidden to change over to ×10 function status;
2. If there have been 4 decimal places, it’s forbidden to change over to ×10 function status;
3. Under ×10 function status, both serial output and printing output are forbidden.
4. Under ×10 function status, it’s forbidden to tare.
WEIGHT
MAINTENANCE
FUNCTION
F2.1
=
1
Operation
method
In normal weighing state, press
on the operation panel, the will instrument lock display weight of the current scale, and “Hold” indi-
cation lamp is on. Only when weight setting value
≥
F2.2 is displayed, weight maintenance operation is effective. Otherwise, it will return to
weighing state after invalid operation information [
--no--
] is shown for a second.
If weight is in locked state, press
again to cancel locking of weight and return to normal weighing state, and “Hold” indication
lamp is off.
If it is in weight locking state, refuse to remove skin, clear skin and setting operation.
PERCENTAGE
DISPLAY
F2.1
=
2
Display
specification
Display [
Pr 20.
], representing 20.5 %.
Pr = current actual weight / range ×100%.
Press
to display switch in percentage and weight.
CHECK
WEIGHT
AND
SELECTION
SCALE
FUNCTION
F2.1
=
3
Function
description
Set parameters such as F2.2 = A, F2.3 = B, F2.4 = C and F2.5 = D.
When display weight is X.
If X
≤
A, do not conduct check weight and selection.
If X < (B – D), it lacks of weight, and the display flickers.
USER’S MANUAL
TRANSERENITE ARX
