1. Design features
Circuit Configuration
Frequency Response
Signal to Noise Ratio
Input Sensitivity
Input Level Selector
Crossover
Low Pass Crossover Range
Subsonic Crossover Range
Bass Boost
Bass Boost frequency
Phase : 0 ~ 180
Remote Control w/clip indicator
Damping Factor
Power Terminal gauge
Fuse Rating
Zero1
HI-EF Class D Mono
: 15Hz ~ 250Hz
: 100dB
: 6V ~ 0.2V
: -
: 24dB / Oct
: 35Hz ~ 250Hz
: 10Hz ~ 50Hz
: 0 ~ 9dB
:
: 300<
: 0 ga x 3
: 350A
All features are subject to change in the continuing effort to improve the products without notice.
Power @ 1
(12V < 1% THD)
Power @ 1
(14,4V < 1% THD)
Power @ 1
(15V < 1% THD)
Zero1
2400 W x 1 4200 W x 1 4500 W x 1
Specifications (detailed)
2) The amplifier has a 4 stage advanced protection circuit;
-Thermal protection, Voltage sensors, DC offset & short circuitry via speaker outputs.
The
Zero1
utilizes a double sided SMD pcb & high current mosfet switching devices in both
the in- and output stage.
A
4) wired remote level control with clip indicator is included with the amplifier.
- This unit will enable remote gain adjustment.
- For more advanced features like selectable bass frequency, boost level & gain,
the
Better Bass Remote
(optional) can be used.
5) The crossovers of the
Zero1
are variable 24 dB/octave filters for both low pass & subsonic.
Specifications
Continious output power rating (RMS)
The
Zero1
operates stable @ impedances of minimum 1 mono.
- Running the amplifer at that impedance sets requirements to both ventilation & the battery system.
Operation below minium impedance will void the warranty.
1)
3)
3
1400 W x 1 2400 W x 1 4200 W x 1
Power @ 4
Power @ 2 Power @ 1
(14,4V < 1% THD)
: 30 ~ 80Hz
Power @ 4
Power @ 2 Power @ 1
(12V < 1% THD)
900 W x 1 1600 W x 1 2700 W x 1
Summary of Contents for Zero1
Page 1: ...MODEL Zero1 Product id ZERO1D12 OWNER S MANUAL Zero1...
Page 10: ......
