Page | 11
4.
Select Calibration Procedure
5.
Select Eccentric Load
6.
Press calibrate / “coefficienti calcolati” to starting the Eccentric p
rocedure
7.
Select the calibration Type (By side or by ID). In the example we will use the
calibration by side
8.
Calibration of the dead load. Check if the scale is empty and press calibrate /
“coefficienti calcolati” to
calibrate the dead load
9.
At the end of the Dead load calibration the DD ask to load the cell in position
1. When weight is centered over cell, press Calibrate / “coefficienti calcolati”
