background image

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT884-L

SHORT THROW PROJECTOR WALL MOUNT

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Mount

Installation Safety Notes.....................................................................................................................2
Parts List............................................................................................................................................4
Installation Instructions.......................................................................................................................6

Product Dimensions..........................................................................................................................10
B-Tech Contact Details.....................................................................................................................12

PLEASE KEEP THIS FOR FUTURE REFERENCE

Crosshead / Flathead

screwdriver

Drill

Pencil

Level

(optional)

Stud finder

(optional)

13mm (1/2")

Spanner or socket

10mm (7/16") masonry bit

or 6mm (1/4") wood bit

  Designed for short throw projectors  

up to 10kg (22lbs) 

  Fe/-20° tilt and +/-20° roll 

  Telescopic arm mounts projector  

880mm (34.6”) – 1510mm (59.4”) from wall 

  Cable management included 

  Coverplate included for smart installation 

  Maximum distance between any two  

fixing points: 300mm (11.8”) 

Summary of Contents for BT884-L













Reviews: