22
ACCESSORIES
16
Disabling the pop-out function
(optional)
To prevent the mount from being
able to pop-out, tighten the locking
screw at the bottom of both the
interface arms.
Note:
The pop-out prevention
locking screws must be wound
in fully when the interface arms
are closed to prevent them from
popping out.
Important:
Do not insert the locking
screws into the locked postion
when the interface arms are
popped out.
A locking screw is featured on each arm
13mm
Unlocked postion
LOCKING SCREW
Locked postion
LOCKING SCREW
BACK
FRAME
EYE BOLT
Eye Bolt
(not essential)
Used to help tie framework back to walls.
Wall Tie Back
(not essential)
BT8380-WTB
Used to help tie framework back to walls.
WALL TIE BACK
INTERFACE
FRAME
BT8350-EB
SAFETY
SCREW
LOCKING
SCREW
CABLE
(not included)