3
Attach Rails to Columns
12
On the floor, lay the columns (part B1) on the mounting rails (part D1) so the
joining plates (part C1) are face down. Through the joining plates, fasten the
M8 x 12mm screws (part C3) into the inserted M8 sliding nuts (part C2)
attaching the mounting rails to the columns.
To ensure straight assembly of columns (part B1), make sure the distance
of the outer joining plates (part C1) to the end of the rails (part D1) are set
the same on each rail.
B1
D1
C3
C1
Assemble
as shown
C3
B1
C2
D1
C1
BACK
C5
Equal
distance
to end of
rail
CORRECT
WRONG
X
D1
D1
