13
To balance the screen use a drill driver at low torque setting and a 10mm socket.
i. Turn the left spring tension point counter-clockwise for 5 seconds.
ii. Turn the right spring tension point counter-clockwise for 5 seconds.
iii. Repeat steps (i) and (ii) until the screen is nearly balanced.
iv. Fine tune the spring tension points until
item 6
can hold the screens
weight at every height (this may take some time).
SPRING TENSION
POINT
SPRING TENSION
POINT
DRILL DRIVER
10mm
SOCKET
14.
BALANCE SCREEN TO ENABLE HEIGHT ADJUSTMENT
SCREEN
SCREEN
23
20
8
0 to 4.5
13.
SECURE SCREEN TO MOUNTING PLATE
Insert
items 20 & 23
into
items 8 & 9
and set tilt
(if required)
.
Do not fully tighten until the tilt is set.
9
20
M8 x 16mm
