Cleaning System ud-800 Page 1
1.
Important Information
Thank you for the trust you placed in us by purchasing this B-TEC product. On the machines type plate
you find the exact type designation and serial number to ensure good service and shipment of spare
parts. The cleaners have been designed and manufactured to the highest quality standards for best
operational safety.
Read this document carefully before putting the ma-
chine into operation and keep it for future reference.
On page 21 of this manual, there is a form for documenting the safety inspections to be carried out at
regular intervals. The form has to be filled in by specialist technicians (persons with sufficient
knowledge and experience or manufacturer's technicians) or experts (e.g. engineers or Technical Con-
trol Board experts).
A safety inspection must be carried out before
commissioning and at least once a year.
B-TEC machines are to be used solely in accordance with the intended use. Usage not in accordance
with the intended use as well as unauthorised modifications invalidate the liability of the manufacturer
for any damages resulting from this. Detailed information regarding intended use to as well as liability
and warranty can be read in section 1.3 and 1.4.
The B-TEC machines are only to be used according to the intended used. Im-
proper use of the machine can endanger the health of the operator.
1.1.
Explanation of the Symbols
To directly draw attention to important information in this operating manual, the symbols "Caution!"
and "Notice!" are used. Please note that paragraphs with these symbols need particular attention.
Caution!
You will see this symbol whenever attention is drawn to situations in which danger to life
can arise due to or during incorrect or improper operation. Pay special attention to these
symbols and act carefully.
Notice!
You will see this symbol in the operating manual whenever your attention is being drawn
to correct work procedures, economic ways of operating or when the machines may be
damaged by incorrect operation.
1.2.
Operating Instruction
The responsible person within the company where the machine is placed has to create operating in-
structions in accordance with the "Occupational Safety and Health Regulations" applicable in the re-
spective country. The operating instructions must be adapted to the cleaning fluid used and country
of application.
1.3.
Liability and Warranty
The cleaning machine is state of the art, tested and operationally safe. Liability for the function of the
machine is transferred to the operating company, if the machine is improperly maintained or repaired
by persons who are not authorised by the manufacturer and / or supplier, or if it’s used against the
