Cleaning System ud-800 Page 2
intended use and the instructions of the user manual. The operator is obliged to operate the machine
only when in immaculate condition. The manufacturer is liable for errors or omissions - to the exclusion
of further claims - only within the scope of the statutory warranty obligations. We reserve the right to
make technical changes any time for continuous development and improvement of our products. Such
changes, mistakes and misprints do not constitute a claim for damages. Only original spare parts and
accessories are to be used. The manufacturer and / or supplier is not responsible for damages caused
by ignoring the instructions in this operating manual. Warranty and liability conditions of the manu-
facturers and / or supplier sales and delivery terms are not extended by the above notes.
B-TEC warrants its products to be free from defects in materials and workmanship, for a period of 24
months on a one shift basis. In case of exceptional usage such as multiple-shift operation, the statutory
warranty is shortened to 12 months (two-shift operation) or 8 months (three-shift operation). The
period starts from the date the machine is shipped from the factory. The guarantee expires prema-
turely if the customer or a third party undertakes inappropriate modifications or repairs or if the cus-
tomer, in case of a defect, does not immediately take all appropriate steps to mitigate the damage and
give the supplier the possibility of remedying such defect.
1.4.
Intended Use
This spray gun cleaning system may only be used for its intended purpose. It is not
intended for other purposes than the following terms. The manufacturer/supplier is
not liable for any damages resulting from improper use.
The intended use of this machine is to clean spray guns or paint-soiled parts/tools (e.g. stirring rods,
mixing bowls etc.).
The machine can be used with the following cleaning agents (For details see section 3):
Solvents (GHS categories 2 and 3).
Non-combustible, water-based cleaning fluids for water soluble paints.
Cleaning agents containing more than 65% of acetone are not permitted.
This machine is for commercial use only, but not for continuous operation (e.g. serial production).
This machine is classified as equipment group II, equipment category 2G, type of protection Ex h, eligi-
ble for gases of explosion group IIB, equipment protection level Gb and can be used in zone 1.
See also type plate:
II 2G Ex h IIB T6 Gb
Improper use of the machine can endanger the health of the operator and of others and cause damage
to the cleaner itself or to other objects. Any other use of the machine must be agreed and approved
with the manufacturer in advance.
1.5.
Requirements to be the Operator
The machine may only be used by competent personnel who, by virtue of their training, knowledge or
experience, ensure proper handling and are aware of the dangers (for example, by reading the oper-
ating manual).
