IR-B02 Page 8
equipment and facility engineering
4. Operating instructions
Notes:
Power supply: 1PH 230V 50/60HZ
Do not touch the lens cap during and after curing to avoid
burns.
1.
Move the device and choose the optimal distance between emitter and car body. The
optimal distance amounts approximately 30 – 50 cm. (When using the distance sensor: green
light)
2.
Adjust the direction of the emitters. They have to be aligned parallel to the car body.
3.
Adjust the timer button (7) to set Pre-heating baking time.
4.
Adjust the timer button (8) to set full baking time.
5.
Turn on the power switch (11).
6.
Turn on the switch for ultrasonic distance measuring device (6) and set the optimal distance.
The optimal distance is reached, when the green indicator lights on (3). As required, you can
also shut down and ignore this function.
7.
Turn on emitter (9,10) to start work.
8.
The machine stops automatically after the entered time. If you want to continue, restart the
machine after cutting off the power some minutes.
4.1 Curing times
All values are only reference values. Discuss the exact times with your supplier !!
Paint type
Flash off
Full bake (Minutes)
Filler/Stopper
---
5-7
Primer
---
6-8
Hi-build
---
10-12
Solid-color
---
11
Clear coat
---
12
(1) red light: Distance is too close
(2) yellow light: Distance is rather close
(3) green light: Distance is suitable
(4) yellow light: Distance is rather far
(5) red light: Distance is too far
(6) Switch for ultrasonic distance measuring device
(7) Timer for pre-heating time
(8) Timer for full baking time
(9),(10) Start key
(11) Power switch
