![b-mola BM50 Operation Manual Download Page 9](http://html1.mh-extra.com/html/b-mola/bm50/bm50_operation-manual_3099400009.webp)
Rated Voltage
Rated Frequency
Airflow
Volume
(m
3
/hr)
Power
Supply
Power
Consumption
(W)
Noise Level
(dB)
Product
Dimension
(L x W x H)
(mm)
Net
Weight
(kg)
Treatment
System
Active Oxygen
Generator
Pre-filter
NCCO Reactor
Sterilization
Remove dust and hair
Remove odour and decompose harmful
pollutants such as formaldehyde and VOCs.
HEPA Filter
Remove dust, hair and airborne particles such as
allergens and pollen, bacteria, viruses and fungus.
3
15
20
35
143
170
36
52
56
Lowest
Highest
Turbo
Lowest
Highest
Turbo
Lowest
Highest
Turbo
Mode
Mode
Mode
340(L)x 200(W)x 348(H)
4.9
110-240V~
50-60Hz
16
15
Problems
Solutions
The unit does not operate.
Check if the unit is correctly connected to its power supply.
Turn on the unit.
‘EE’ is displaying on Display Screen,
the unit is not operating and making
‘DiDi·DiDi’ sound.
No air is blowing through air outlet.
Check if the unit is correctly connected to its power supply.
Check if the power cord interface is in good service condition.
Check if the filters have been correctly installed.
Re-install all filters.
The unit makes an abnormal
noise.
The unit emits an unusual smell
or smog. (e.g. smoke, flame, or
burning)
The unit may malfunction. Call the customer service center
for advice or consult with a qualified provider.
Make sure the air inlet and outlet are not blocked by
external objects.
Remove all adjacent objects that block the air inlet
and outlet.
Turn off the unit and disconnect it from power supply.
Call the customer service center immediately or contact
with a qualified provider.
The air quality is not yet improved
after a long time operation.
The Filter may require cleaning and replacement.
If the unit is used in a seriously polluted area, the treatment
process would take longer than normal. It is recommended
to operate the unit with high airflow mode until the pollution
diminishes.
The airflow from air outlet
becomes slow.
Make sure all packaging materials are removed.
Make sure all packaging materials are removed.
Filter may be blocked.
Replace the filter. (See section "filter cleaning and
maintenance" of this manual)
Other Intormation
Trouble Shooting
Other Intormation
Product Specification