-12-
PIN2
The PIN2 code (4 to 8 digits), supplied with USIM card, is required to access some functions such as
“call costs setup” and “fixed dialing setup”. Please contact the network operator to verify whether your
USIM card supports these functions. If you input wrong PIN2 for three times, the PIN2 will be locked. To
unlock the PIN2, input the correct PUK2 as follows:
-Input the correct PUK2 according to the screen prompt to unlock the PIN2.
-Then input the new PIN2 and press the OK key.
-Input the new PIN2 again and then press the OK key.
PUK2
The PUK2 code (Personal Unlocking Key2, 8digits), supplied with USIM card by the vendor. If not,
contact the network operator. If you input wrong PUK2 for ten times, the PIN2 will be invalid and the
corresponding functions cannot be used. Please contact the network operator to replace the USIM card.
Function protect
You can select this feature to encrypt messages, contacts and call log. Set the password and select items to be
encrypted. After encrypt, when you need to view messages, contacts and call log, you are required to enter
the correct phone lock password first. The initial password is 0000. You can access this function through the
path: Main menu> Settings> Advanced>Security settings>Function protect.
3.2
Installing T-Flash Card
The T-Flash card is a pluggable mobile storage card inside the mobile phone.
To install the T-Flash card, open its latch, place its indented side downward, insert the card into the card slot,
and then close the latch.