4
INPUT
USB
COAX
AES
TOS
ON
MUTE
ON
MUTE
VOL-HP
VOLUME
DSD
4
4
POWER
INPUT
VOLUME: LINE
B.M.C. Link
MUTE: LINE
VOLUME: Headphone Section
MUTE: Headphone Section
Playback Signal Indicator
¼” Headphone Terminal
4-Pin Balanced XLR Headphone Terminal
Press for powering the unit on and off.
Press for changing the active input. Each press moves down one input step displayed at
Adjust the volume level for the either the balanced XLR or the unbalanced RCA output. Refer also to the
section
. The volume position is indicated at
Toggles the line output mute on and off.
Adjust the volume level for the either the balanced 4-pin-XLR or the unbalanced ¼” terminal. The
volume position is displayed in
Toggles the line output mute on and off.
For PCM signals the detected playback sampling frequency is displayed. A 176kHz, 192kHz, 352kHz or
384kHz playback is indicating ” HR”, which stands for “High Resolution”. Note: high resolution playback
is available using a USB connection only. For any DSD playback the “DSD” indicator lights up.
Note:
DSD is available using a USB connection only.
Connect a standard headphone with a ¼” stereo plug. The plug must be fully inserted for proper
function. Note: This is not the recommended headphone operation mode for the PureDAC.
Connect a Headphone for balanced mode operation to this plug. This is a very low
impedance output and the best way to drive a headphone. XLR pinning:
1 = Left channel, non-inverted
2 = Left channel, inverted
3 = Right channel, non-inverted
4 = Right channel, inverted
Front Functions
