Operation
40
Calibration >
To enter the
Calibrator
menu press the
icon then select the
System > Calibrator >
tab.
Cal Output
Enable/disable the output of the built-in 0 dBm 50 MHz test source.
Note:
The built-in test source of the RFM3000 is not a sufficiently calibrated source for per-
forming a fixed calibration. An external calibration source is required.
Figure 4.23
Calibrator
Exit >
To enter the
Exit
menu press the
icon then select the
System > Exit >
tab.
Exit to Desktop
Exits the RFM3000 Power Meter Main application to access the OS Desktop.
Shut Down
Shuts down power to the PMX40 putting the meter in standby mode and is the same
as pressing the ON/Standby button on the front panel.
Figure 4.24
Exit
Reports >
To enter the
Reports
menu press the
icon then select the
System > Reports >
tab.
Configuration
Select Show to display an About dialog with configuration information for the
RFM3000 Power Meter like that shown in figure
Figure 4.25
Reports
Summary of Contents for RFM3000 Series
Page 1: ......