10"
(254mm)
"A/D" CAP
3" Dia.
(76mm)
2 11/16"
(68mm)
"B"/"E" CAP
(203mm)
8"
(76mm)
3" Dia.
2 11/16"
(68mm)
"C" CAP
(178mm)
7"
(76mm)
3" Dia.
Patented 360HD™
Mounting System
"B"/"E" CAP
3"
(76mm)
1"
(25mm)
"A"/"D" CAP
3"
(76mm)
5"
(127mm)
"C" CAP
2"
(51mm)
2 11/16"
(68mm)
YOSEMITE SERIES
Integral -LED
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
RELEASED DATE
04/21/2021
REFERENCE NUMBER
INS-2845-00
14. Tighten three (3) captive #6-32 screws with a
7/64” allen wrench to secure cap assembly.
13. Re-install end cap assembly.
Standard Installation
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
INSTRUCTIONS
4. Use a 3/16” allen wrench to loosen (1) 1/4”-28
x 1-1/4” stainless steel black oxide socket head
cap screw at the knuckle for vertical aiming
purpose.
Tighten (1) 1/4”-28 x 1-1/4” stainless steel
black oxide socket head cap screw to 24”
minimum to 48” maximum pounds to secure
vertical aiming position .
2. Rotate fixture at base and aim fixture to
desired horizontal location.
3. Tighten (1) 3/8”-16 x 3/8” stainless steel
black oxide set screw on the stem to secure
horizontal aiming position.
1. Use a 3/16” allen wrench to slightly loosen
(1) 3/8”-16 x 3/8” stainless steel black oxide set
screw on the stem for 360° aiming purpose.
Warning: Do not over tighten set screw.
Doing so will compromise o-ring seal and
will void warranty.
Knuckle Adjustment
