![background image](http://html1.mh-extra.com/html/b-k-lighting/well-star-ws-series/well-star-ws-series_installation-instructions_3121395002.webp)
4. Insert fixture housing and low voltage wire into
trench.
SUBMITTAL DATE
9-29-11
REFERENCE
NUMBER
INS000968
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
PROJECT:
TYPE:
5. Back fill with pea gravel or sand to allow sufficient
drainage. Install housing flush at grade.
Finished grade
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
ETL LISTED
CONFORMS TO ANSI/UL
STANDARD 1838 AND UL SUBJECT 8750
CERTIFIED TO CAN/CSA
STANDARD C22.2 NO. 9
Pea gravel or sand
Finished grade
Dirt or soil
WELL STAR™
Installation Instructions
TECHNOLOGY
with
To Change Lumen Output (when required).
1. Use 5/64” Allen wrench to loosen #8-32
stainless set screw and remove cap.
3. Place cap on fixture and tighten set screw.
2. With flat head screw driver rotate dial to
desired lumen output.
This product is available with Adjust-e-Lume™ (Patent Pend.) for Dynamic
L
Lumen Output Control