PROJECT:
TYPE:
SUBMITTAL DATE
12-12-11
REFERENCE
NUMBER
INS000969
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
ETL LISTED
CONFORMS TO ANSI/UL
STANDARD 1838 AND UL SUBJECT 8750
CERTIFIED TO CAN/CSA
STANDARD C22.2 NO. 9
SQUARE ADJUSTABLE WELL STAR
Installation Instructions
5. Align and orientate Concrete Pour Collar on
housing to illuminated object. Back fill with pea
gravel or sand to allow sufficient drainage. Install
housing flush at grade. See wiring diagram.
6. Make two water tight, low voltage connections
using proper wire connectors (By Others).
7. Loosen stainless steel phillips head cap screw
on adjustable bracket, aim to desired location.
Tighten to maintain aiming position.
Pea gravel or sand
Finished grade
Dirt or soil
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
8. Attach faceplate to Concrete Pour Collar with four
screws using a 3/16” Allen wrench.
Finished grade
1. Remove mounting screws.
2. Rotate large bracket 45º.
3. Secure mounting screw.
To Change Lamp Tilt Orientation
TECHNOLOGY
with
