40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
PROJECT:
TYPE:
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASED
4-25-18
REFERENCE
NUMBER
INS-2108-00
ALPINE™
/
MAMMOTH™
SERIES
PAR 30/38 Halogen Installation Instructions
WIRING DIAGRAM
Phase 1 - Rough In
Installation of Back box
1. Install Conduit (By Others) to be used with
this product.
2. Install junction box (By Others) so that front
face is flush with finished wall. Seal building
envelope as per NEC.
3. Connect box to conduit and pull wires for
connections (See wiring diagram).
Additional Info
• Please follow National and Local electrical codes for your area.
• 4” round cast box
• Suitable for through wire
• Suitable for installation into combustible materials.
• Rated for 90° C.
• Junction box, universal mounting ring screws, box mounting hardware
and gaskets (By Others)
3. Mount fixture using two (2) #10-24 hex screws
to installed back box using 1/8” Allen wrench.
Seal building envelope as per NEC.
Do not
overtighten.
Phase 2 - Finish Installation of Fixture
1. Install universal mounting ring (supplied with
fixture) using #10-24 screws onto back box. Align
fixture mounting holes to final mounting position.
2. Make watertight connections with branch
circuit wiring to fixture leads using waterproof
wire connectors (By Others). Connect
grounding wire to ground wire from fixture.
See wiring diagram.
LINE
FIXTURE
COM
GROUND
LINE
COM
GROUND
