background image

Contents in the Box

FCC and IC Statement

EU & UKCA 
Declaration of Conformity

This device complies with Part 15 of the FCC Rules and  Industry 

Canada license exempt RSS standards. Operation is subject to the 

following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

FCC Warning:

 Any changes or modifications not expressly approved 

by the party responsible for compliance could void the user’s 

authority to operate this equipment. 

Note:

 This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the 

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device meets the FCC and IC requirements for RF exposure 

in public or controlled environments. The end user is advised to 

maintain a distance of 20 cm from the controller and any personnel 

to ensure compliance with RF exposure regulations.

This Class B digital apparatus complies with Canadian ICES-003

Orbit Irrigation Products, LLC

915 N. Overland Rd., North Salt Lake,

UT 84054 USA 

Declares under our sole responsibility, that the product:

B-hyve® Smart Wi-Fi Indoor Sprinkler Controller

Complies with the following:

European Directives 2014/53/EU and UKCA Radio Equipment 

Regulations 2017, SI 2017:1206 (as amended by SI 2019:696) with 

reference to the following standards:

IEC (EN) 60730-1:2013

IEC (EN) 60730-2-7:2010

BS EN & EN 50663:2017

EN 301 489-1 V2.2.3

EN 301 489-17 V3.2.4

BS EN & EN 55032:2015/A11:2020

BS EN & EN 61000-3-3:2013+A1:2019

BS EN 55035:2017/A11:2020

EN 300 328 V2.2.2

 

Wi-Fi Indoor Sprinkler Controller

 

Screwdriver 

 

Mounting Screws and Anchors

 

Transformer 

 

Quick Start Guide

 

Conduit Cover

The B-hyve® App

  Install the B-hyve® app on  

your smart device

 

You will need a smart device to connect 
the controller to Wi-Fi. 

 

Note: 

The app will guide you through 

initial set up of your sprinkler 
controller. In addition, there are help 
icons throughout the app with more 
information and useful tips.

Controller Connected 

Symbol

Rain Delay

Calendar

Programs

Remote Control  

or Home Button

Zone List

Settings

Next Zone

Stop Watering

Running Status/Messaging

Weather/Temperature

EN

IFETEL: 11858C0221 

Summary of Contents for 57915








Reviews: