7
ENGLISH
Cleaners For Fittings and Accessoires
To avoid damaging the surface and working components of the fittings, certain precautions must be taken in
terms of usage and subsequent cleaning as many cleaning agents contain acids for general cleaning and
removing calcium deposi
ts. When caring for your fittings and accessories, please note the following:
•
Only apply cleaners which are expressly intended for the use.
•
Never use any cleaner containing hydrochloric acid, formic acid or acetic acid on or near the
fitting, as they can
cause considerable damage.
•
Do not use cleaners containing phosphoric acid.
•
Do not use cleaners containing chlorine bleach solutions.
•
Never mix or combine cleaning agents.
•
Abrasive cleaners and unsuitable scouring agents such as scouring pads.
CLEANING/MAINTENANCE
For correct cleaning of the tap, wash it only with solvent-free products. DO NOT use detergents containing
corrosive or acid substances (hydrochloric, acetic or phosphoric acid), abrasive sponges and metallic scouring
pads. It‘s advisable to use specific products for stainless steel. Our products do not require any particular
maintenance, apart from periodical cleaning of the aerator which, over time, collects debris and impurities
present in the pipes, thereby causing a gradual reduction in flow. Proceed as follows: 1- Make sure the tap is
closed, unscrew the aerator (1) using the special wrench (2) supplied. Once removed, free the inner filtering
part of impurities using descaling solutions using (e.g. vinegar). Wait a few minutes, rinse under running water
then refit the aerator.
Summary of Contents for RVS BD700.000010
Page 8: ...8 BD700 000010 100...