If you can find a Four Blade Prop you can skip
this step.
You can make a Four Blade Prop by notching a
Two Blade Prop on the Bottom Side of Center and
notching another Two Blade Prop on the Top Side
of Center as shown. Glue/epoxy the two props
together.
On this plane I used Two props (to
make One 4-blade prop) from Tower
Hobbies (www.towerhobbies.com).
Stock #
L5Z94306
STEP # 74
STEP # 75
Cut the Prop Spinner (
PS
), Template # 24, Page 53,
from Can and shape it into a cone. Mark where you
want to trim it and make the slots for the Prop Blades.
Fix the Prop onto the prop shaft.
Be sure prop spins freely.
Glue
PS
onto the prop blades.
STEP # 76
PS
PS