Welcome to the
B. C. Air
Originals
Squadron.
This booklet contains complete step by step instructions for building the
B. C. Air
Originals
- Pilatus PC-12 NG
. Before you start building your first aircraft it is
suggested that you review the entire set of plan directions. Once you have pre-
viewed the construction steps you should start collecting the cans that you want to
use to make your first plane. These plans are designed to be used with most any 12
or 16 oz. beverage can. Always use clean, unscratched and undented cans for the
best looking models.
Since the building of these models requires the cutting of cans and the use of sharp
tools,
CHILDREN SHOULD NEVER ATTEMPT THE CONSTRUCTION OF
THESE MODELS WITHOUT ADULT SUPERVISION AND GUIDANCE.
CONSUMER ACCEPTS ALL RESPONSIBILITY FOR ANY INJURY IN-
CURRED IN THE BUILDING OF THESE MODELS.
It is not necessary to follow all the building steps in the order presented. Such as, if
you want to make the Wings first, you can do that and then set them aside until you
need them. However, until you understand the construction of these models, it may
be easier to follow the steps in the order listed. Your very first step should be to
make a copy of all the templates.
All templates are drawn to scale.
Using a sheet
of mylar (Clear Plastic) will enable you to re-use your templates again and again.
There is no limit to the number of planes you can build with these plans.
We, at
B. C. Air
Originals
, will make every effort to assist you in answering any
questions you may have about the construction of these models. Please feel free to
contact us ANY TIME at [email protected].
Thank you
for your interest in the
B. C. Air
Originals
and have
FUN!
D. P. (Wayne) Mathis