STEP # 21
Place
WS
in position (on the
CPF
) and mark the
CPF
where slits will be needed for the
WS
Tabs.
CPF
WS SLIT
WS SLIT
Trim
EM
if necessary.
EM
EM
STEP # 22
Glue
WS
in place on top of
EM
and
CPF
as shown.
WS
STEP # 23
Trace Template # 7,
CPC
(page 35)
,
onto a Can and cut out the windows
as shown.
CPC
FIRST, “SCORE” the windows with a
ball point pen.
NEXT, cut a small hole in the middle of
the window, using your X-Acto knife.
NEXT, use a small scissors and cut,
from the hole, to each corner of the
window. (See next page).
(I used Hot Glue for this.)
www.
bc
air
.com
