background image

9

Cleaning and storage

troubleshooting

How do i clean Omnitest® 5?

Wash and dry your hands before use to prevent 
damage to the meter and test strips. the meter 
should be cleaned with a soft cloth or paper towel 
if necessary. 

Do Not

 apply pure alcohol directly 

to the meter for cleaning. instead, use a tissue 
that has been moistened with a small amount of 
alcohol. Allow the meter to dry completely after 
cleaning in a cool location away from direct  
sunlight. the meter and test strips must not be  
immersed in water or other fluids.

  

see also “Cleaning information” available as PdF.

What should i not use to clean Omnitest® 5? 

Do Not 

use chemical solvents such as benzene or acetone because 

these may damage the surface of the Omnitest® 5 and damage it.

How should i store Omnitest® 5?

After testing, store the Omnitest® 5 components in its case in a cool dry 
place out of the reach of children.

What should i avoid when storing Omnitest® 5? 

do not store the meter and test strips near sources of heat, direct  
sunlight or in the refrigerator. strong electromagnetic fields (e.g. from 
mobile phones or microwave ovens) can interfere with the measurement 
function.

Why does the Omnitest® 5 device need five  
seconds to take a measurement and require a 
larger blood sample than Omnitest® 3?

the new measurement system with the new test strip enzyme and the 
third electrode for underfil detection require a sample volume of 0.5 µL 
and a measurement time of 5 seconds.

Why does my Omnitest® 5 calculate e.g. averages  
of only 490 measurements, while 500 readings 
are stored? 

the apparently missing ten measurements in this example were made 
with the control solution and therefore do not appear in the averages.

Why does an empty battery symbol appears when 
i turn it on even though my device is new? 

the battery segment is displayed as part of the  
display test when switching on the meter – as well 
as all other display segments.  
this display is made for safety reasons and does 
not reflect the current battery status.

Omnitest® 5

Summary of Contents for Omnican Lance













Reviews: