background image

5

  products designed to be used with the product
  3. use of the product with accessories, peripheral 
  equipment and other products of a type, condition and 
  standard other than  prescribed by B-Band
  4. repair or attempted repair by persons who are not 
  B-Band employees
  5. adjustments or adaptations without 
  B-Band’s prior written consent, including:
  - upgrading the product beyond specifications or features 
  described in the instruction manual, or 
  - modifications to the product to conform it to national or 
  local technical or safety standards in countries other 
  than those for which the product was specifically designed 
  and manufactured
  6. neglect
  7. accidents, fire, liquids, chemicals, other substances, 
  flooding, vibrations, excessive heat, improper ventilation, 
  power surges, excess or incorrect supply or input voltage, 
  radiation, electrostatic discharges including lighting, other 
  external forces and impacts.

4.  This  guarantee  covers  only  hardware  components  of  the 
product.

EXCLUSIONS AND LIMITATIONS

EXCEPT  AS  STATED  ABOVE,  B-BAND  MAKES  NO  WAR-
RANTIES (EXPRESS, IMPLIED, STATUTORY OR OTHERWISE) 
REGARDING PRODUCT PERFORMANCE, ACCURACY, RELI-
ABILITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  OR  OTH-
ERWISE. If this exclusion is not permitted or fully permitted by 
applicable law, B-Band excludes or limits its warranties only to 
the maximum extent permitted by applicable law. Any warranty 
that cannot be fully excluded will be limited (as far as permitted 
by applicable law) to the duration of this Guarantee.

B-BAND’S  ONLY  OBLIGATION  UNDER  THIS  GUARANTEE 
IS TO REPAIR OR REPLACE PRODUCTS SUBJECT TO THESE 
GUARANTEE TERMS AND CONDITIONS. B-BAND IS NOT LI-
ABLE FOR ANY LOSS OR DAMAGE RELATING TO PRODUCTS, 
SERVICE, THIS GUARANTEE OR OTHERWISE, INCLUDING - 

ECONOMIC OR INTANGIBLE LOSSES – THE PRICE PAID FOR 
THE  PRODUCT  -  LOSS  OF  PROFITS,  REVENUE,  DATA,  EN-
JOYMENT OR USE OF THE PRODUCT OR ANY ASSOCIATED 
PRODUCTS - INDIRECT, INCIDENTAL OR CONSEQUENTIAL 
LOSS OR DAMAGE. THIS APPLIES WHETHER THAT LOSS OR 
DAMAGE RELATES TO: IMPAIRED OR NON-OPERATION OF 
THE PRODUCT OR ASSOCIATED PRODUCTS THROUGH DE-
FECTS  OR  UNAVAILABILITY  WHILE  WITH  B-BAND,  WHICH 
CAUSED  DOWNTIME,  LOSS  OF  USER  TIME  OR  BUSINESS 
INTERRUPTION  INACCURACY  OF  OUTPUT  FROM  THE 
PRODUCT OR ASSOCIATED PRODUCTS.

THIS APPLIES TO LOSS AND DAMAGES UNDER ANY LEGAL 
THEORY,  INCLUDING  NEGLIGENCE  AND  OTHER  TORTS, 
BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, 
AND  STRICT  LIABILITY  (EVEN  WHERE  B-BAND  HAS  BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES).

Where  applicable  law  prohibits  or  limits  these  liability  exclu-
sions, B-Band excludes or limits its liability only to the maximum 
extent  permitted  by  applicable  law.  For  example,  some  coun-
tries prohibit the exclusion or limitation of damages resulting 
from  negligence,  gross  negligence,  willful  misconduct,  deceit 
and similar acts. B-Band’s liability under this guarantee will in 
no case exceed the price paid for the product, but if applicable 
law  permits  only  higher  liability  limitations,  the  higher  limita-
tions apply.

YOUR LEGAL RIGHTS RESERVED

Consumers  have  legal  (statutory)  rights  under  applicable  na-
tional laws relating to the sale of consumer products. This guar-
antee does not affect statutory rights you may have nor those 
rights that cannot be excluded or limited, nor rights against the 
person from whom you purchased the product. You may assert 
any rights you have at your sole discretion.

Summary of Contents for A3T

















Reviews: