14
FORTIS
| Scooter
Moving the seat
•
Pull the lever (on the right below the seat surface, fig. 05) towards
you. The seat can now be moved forwards and backwards.
•
You can now adjust the seat to the required position.
•
Release the lever and ensure that the seat is locked in one of the
closest fixed positions.
Seat height
•
First of all, you must remove the seat and the battery cover.
•
For this purpose, rotate the seat 90° and remove it.
•
The casing is fixed with 2 handscrews (fig. 06).
•
Loosen the screw connection and remove the casing.
•
Disconnect the plug-in connection of the rear lightning (fig. 07).
•
Loosen the screw connection and put the seatpost in the required
position inside the tube guide.
•
Then firmly tighten the screw connection again in the closest hole.
•
Put the seat back on the mounting.
•
Make sure that it is locked in position again.
3.5.3. Back rest
The angle of the back rest on your scooter can be adjusted forwards
and backwards.. You also have the possibilty to limit the adjustment
range backwards.
Adjusting the angle
•
Pull the lever (on the left on the seat, fig. 08) upwards. The back
now pushes forwards.
•
Push the back rest into the required position.
•
Release the lever and make sure that the back rest is locked in
position again.
05
06
07
08