Recommended Accessories
232NM9
Null Modem Crossover Cable
for DTE to DTE connection
DRAD35
Din Rail Mounting Kit 35mm
Document number – 710-10571-00_VESP211_3016qsg
1-888-948-2248 |
Europe:
+353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: [email protected]
Before you begin, be
sure you have
the following:
VESP211 Series
Ultra Compact
Ethernet to Serial Servers
Fast and easy on the web:
www.advantech-bb.com
+
VESP211
+
CD with software and manuals
+
Power Supply
Additional items not included:
+Ethernet Cable(s)
+Null modem cable(s)
+Mounting accessories kit
QUICK START
GUIDE
The primary check for correct operation is the
device LEDs.
For advanced setup information see the “HELP”
section on the right hand side of each page within
the Vlinx Manager.
Select Diagnostic for a check of communications
status with attached VESP211 device, and then
select the device for which the communications
check is desired. A report of reply times and ping
statistics is generated and can be saved.
Note that you can send your configuration files to
B+B Tech Support for review.
Troubleshooting
Reset Mode Switch
Mode Switch Action
Result
Press and Hold in for 0 - 2
seconds
Device enters Console
Mode. The “Ready” LED
turns OFF and the “Serial”
LED turns ON
Press and Hold in for more
than 10 seconds
Reloads Factory Defaults.
After 10 seconds, both the
“Serial” and “Ready” LEDs
turn ON
