5. USER INTERFACES
Figure 16: Ethernet connector
ATTENTION! The Ethernet port is not POE (Power over Ethernet) compatible!
Ethernet cable plugs into the RJ45 connector labeled as ETH. (See figure below.)
Figure 17: Ethernet cable connection
5.7
Port 1
Based on the model number (see chapter 3.4), the expansion PORT 1 may be configured for:
•
Ethernet (same as in chapter 5.6 but plug into PORT1)
•
SWITCH (together with PORT 2)
•
serial communications RS-232 (see chapter 5.11.1) and RS-485/422 (see chapter 5.11.2)
•
12-bit I/O (AI, DI, DO), see chapter 5.11.3
5.8
Port 2
Based on the model number (see chapter 3.4), the expansion PORT 2 may be configured for:
•
SWITCH (together with PORT 1)
•
serial communications RS-232 (see chapter 5.11.1) and RS-485/422 (see chapter 5.11.2)
•
Wi-Fi (connector PORT2 used for indication only – see chapter 5.2.1)
•
SmartMeshIP (connector PORT2 used for indication only – see chapter 5.2.1)
Note: Wi-Fi and SmartMesh IP are wireless – RJ45 connector is used for indication only. (See
chapter 5.2.1.)
19
