B.A. International Optima EOS350, Instructions For Use And Installation, Page: 13 / 223

10
Extraoral Suction System, Instructions For Use and Installation
3. Insert the mouthpiece tube into
the mounting hole of the third joint.
Make sure the thumb screw is aligned
with the center pillar groove. Tighten
the screw.
6 Product Use
6.1 Warnings During Use
•Do not allow any person or object, to inadvertently make contact with the system during
operation.
•Avoid exposing the product to any source of light or heat above ambient conditions, either
before, during or after use.
•To avoid possible bumping or tilting, keep upright.
•Never disassemble the joint cups before or during use. This could lead to possible
accidents or failure.
•Do not tilt the equipment. Otherwise it could lead to personnel injuries.
•If the equipment is found in a tilted state, do not move the equipment horizontally or
attempt to take hold of the equipment by its arms or suction hood.
•Remove the power cord from the mains outlet before moving the equipment.