Solo documento principale.
16/45
Identification: MD-AL-GI-00
Rev. 1.0 28.01.21 - Application: GID
Connext User Manual
Rev. 1.2 24/05/2021
3.1.1.
Installation tools
The following tools are required for installation and electrical connections; therefore, they must be
prepared before installation.
No.
Tool
Function
1
Screwdriver
To screw and unscrew
screws for the various
connections
2
Crimping tool
To crimp the wires
3
Wire stripping tool
To remove the outer sheath
of the wires
4
Multi-meter
To check the voltage and
current values
Table 5 – Installation tools
3.2.
Installation process
3.2.1.
Installation position
Choose an appropriate installation location. Follow the requirements below to determine the
installation position.
The installation location chosen must allow easy access for normal operation and maintenance.
For safety reasons, ZCS and/or its authorised partners may not perform repair/maintenance work
or move the chargers from and to the ground if they are installed at a height of more than 180 cm.
Stations installed at higher heights must be moved to the ground before they can be repaired or
serviced.