The
AZZA
P4X2-A MAINBOARD SERIES
Page 45
CPU Vcore Select (optional for P4X2-AV and P4X2-AC)
If you want to over-clock your CPU you need to adjust the core voltage. When you press
enter a menu with a range of voltage selections will appear. Before you change the voltage,
please refer to the previous menu
PC Health Status
(section 3.9) to check what the Vcore
Voltage is for your CPU. If this field is made too high or too low it will cause damage to your
CPU. If you have set this voltage too low you may not be able to start your PC. To overcome
this problem use the
Ins
Key.
Auto Detect DIMM/PCI Clk
When “Enabled” is selected, the mainboard will detect the presence of devices on DIMM and
PCI slots. When there is no device present on some of the PCI or DIMM connectors, the
clock on the related DIMM and PCI slot will be disabled to reduce the Electro-Magnetic Inter-
ference (EMI).
Spread Spectrum
When Spread Spectrum is enabled, the EMI radiation on this mainboard will be reduced.
CPU Clock Ratio
This field allows you to select the clock ratio. Most CPU clock ratios are fixed inside the CPU
by the manufacturers that prohibit you to make any changes. In this case, the setting in this
field will make no change to the CPU clock ratio since it locks and is automatically deter-
mined by the CPU.
!!
!!
!!
!!
Standard CMOS Features
""""
!!
!!
!!
!!
Frequency/Voltage Control
!
!
!
!
Advanced BIOS Features
!
!
!
!
Advanced Chipset Features
Set Supervisor Password
!
!
!
!
Integrated Peripherals
Set User Password
!
!
!
!
Power Management Setup
Save & Exit Setup
!
!
!
!
PNP/PCI Configuration
Exit Without Saving
!
!
!
!
PC Health Status
ESC : Quit
←
←
←
←
↑↑↑↑
↓↓↓↓
→
→
→
→
: Select Item
F10 : Save & Exit Setup
Load Optimized Defaults
CMOS Setup Utility – Copyright ( C ) 1984 - 2001 Award Software
Load Optimized Defaults
PC
B
I
O
S
PC
B
I
O
S
PC
B
I
O
S
PC
B
I
O
S
3.11. Load Optimized Defaults
BIOS Management
